青岛数能电气工程有限公司

• Accurate measurement for energy contracts

• Power quality measurements in accordance to latest standards for generation, transmission, distribution.

• Multiple industry standard communication ports

• Multiple protocols for integration with SCADA and other automation systems (e.g. IEC 61850).

• Easy retrofit for all rack mounting meters

• Big intuitive graphical display and easy navigation for quick installation and use

• Power Quality compliance reports to EN 50160

• Time synchronization through SNTP

• Comprehensive Power Quality monitoring and analytics tool along with ProQ View

ProQ 100 is backed up by ProQ View, Secure’s webbased state-of-the-art power quality data acquisition and analysis software for comprehensive monitoring of electrical parameters, power quality parameters and overall electrical system health.

With acquisition of instantaneous, energy, power quality parameters, events with pre and post waveforms and half cycle value of voltage and current, on demand waveform and half cycle streaming of voltage and current, ProQ View enables the user for viewing the data in graphical as well as tabular format, in addition to relevant standard reports as EN50160 and ITIC graph.

On the basis of raw data provided by ProQ 100, ProQ View provides various analytics including following features:

• Monitor all power quality parameters and events as per IEC61000-4-30.

• Power quality compliance monitoring as per EN50160*, ITIC* and IEEE 519

• Supply quality indices e.g. SAIFI, SAIDI, CAIDI

• Monitoring TDD* and THD* in voltage and current

• Real time data monitoring

• Reports and trend monitoring

• Harmonic and inter harmonics analysis

• Intuitive Dashboard for all critical power quality parameters

Electrical

• Connection Types: HV4/HV3/LV4

• Measurement voltage range : 3 x 57.7/100 V….240/415 V (3P4W) | 2x100….120 (3P3W)

• Measurement current range : In: 1..5A | Imax: up to 10 A (Configurable)

Accuracy

• Energy: 0.2S Class

• Voltage: 0.1 % reading

• Current: 0.1 % reading

• Power: Class: 0.2S or better

• Frequency: +/- 0.01 Hz

• Burden of measurement inputs with auxiliary supply： Current circuit:

< 0.1 VA/phase @ 1 A

< 0.5 VA/phase @ 5 A

Voltage circuit in case of Aux power: < 0.5 VA/phase

• Maximum overload voltage on voltage measurement inputs：

1.5 times of nominal voltage continuously

2 time of nominal voltage for 0.5 sec

• Maximum overload current on current measurement inputs：

1.5 times of Imax continuously

10 times of Imax for 1 sec

20 times of Imax for 0.5 sec

Compliance

• Metering：IEC 62052-11 and IEC62053-22, IEC62053-24

• Power Quality ：IEC 61000-4-30 Ed. 3, IEC62586-2 (Class-A), IEC 61000-4-7,

IEC 61000-2-4, IEC 61000-3-8, IEC61000-4-15, EN50160,

IEEE1159-3 (PQDIF), COP-1 & 2

• Safety ：IEC62052-31

• Electromagnetic compliance：CISPR 22 (Class A) for radiated and conducted emission

IEC61000-4-2 (Electrostatic discharge), IEC61000-4-3 (Radiated

susceptibility), IEC61000-4-4 (Electric fast transients), IEC61000-4-

5 (Surge & impulse), IEC61000-4-6 (Conducted susceptibility),

IEC61000-4-12 (Damped oscillatory waves)

Environmental

• IP compliance: Meter front fascia - IP 54

Back side - IP20

• Operating temperature : -10º C to +55 ºC

• Limit range of operation: -25º C to +70 ºC

• Storage temperature : -40º C to +70 ºC

• Essailec connectors : -10º C to +55 ºC

• Display : -10º C to +60 ºC

Power Supply

• Type: Main Auxiliary Power Supply & Redundant Auxiliary Power Supply

• Range: 50-230V AC/DC +/- 20%, 50Hz/60Hz, 25VA/15W max

Inputs and Outputs

• Independent fixed Outputs :Fixed 4 outputs (24-230V AC/DC @ 100mA)

• Independent configurable I/O : Configurable block of 4 I/Os (24V-230V AC/DC) Display characteristics

• Display type :4.3 inch color graphical TFT display, Size(105.5 x 67.2 mm), 480 x 272 pixels, pixel size (0.198 x 0.198 mm)

• Language:English, Swedish, German, French, Italian, Russian, Arabic (Field configurable)

• Remote Display:Web server for monitoring and basic configuration

Browser support – Google chrome, IE9 and above

Communication

• Optical por: Common port for IEC1107 & ANSI (without any additional sealing provision)

• RS-232 port : Protocol: DLMS, Modbus

Baud rate: 1200 to 57600 bps, Half duplex

• RS-485 port: Protocol: Configurable DLMS/MODBUS RTU,

Baud rate: 1200 to 57600 bps, half duplex

• Ethernet port : Ethernet 1 over RJ45 10/100 Mbps

Ethernet 2 SFP port 1000 Mbps

Optional IEC 61850 edition 1.0 and 2.0 for both ports

• USB port : micro B connector (DLMS)

• Time Synchronization : Through SNTP protocol

Software Features

• High Speed data recording :1024 samples per cycle, logging in half cycle

• Harmonic distortion: Up to 50 th individual harmonic component for all voltage and current inputs. THD, TDD and K factor

• Load profiling : Two time based loggers

Maximum 100 parameters configurable in each logger

Logging of up to 28 energy channels, with integration period 1 to 60minutes

Logging of more than 80 instantaneous and PQ parameters, with integration period 1 to 60minutes

Maximum of 300 days (@ 30 minute SIP for parameters 1..100)

Maximum of 10 days (@ 1 minute SIP for parameters 1..100)

• Waveform capturing: Voltage and current wave form capturing

10 cycles for Pre & post of event

1/2 cycle rms values for 8 channels can also be logged for 20 values (Pre & Post each)

• Alarms and events : Sags/swells, interruptions, Frequency variations

Harmonic and inter harmonic logging

Direction detection of harmonics

Voltage and current THD coefficient

Alarms on display for PQ and revenue events

• Logging and Configurable parameters: 16 time of use tariff, 16 seasons, 16 day types and 16 time zones, 53 billing dates, DST dates

for 25 years

Alarms and compartments for event logging

Logging of up to 24 set of historical data logging

Logging of up to 65 days for daily energy snap shot